|
Requirement :
|
Material supply for MGNREGS works for the Ward 1, 2, 3, 4, 5, 6, 7 - Stone Aggregate(single size) 40 mm nominal size, Stone Aggregate(single size)20 mm nominal size, Coarse sand (zone III), Quarry muck, Portland Cement, Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper, Vibrator (Needle type 40 mm), Stone for masonry work, Stone Aggregate(single size) 10 mm nominal size, Stone Aggregate(single size) 6 mm nominal size, Twisted steel/deformed bars, wall form panel 1250x500 mm, Corner angle 45x45x5 mm 1.50 m long, 100 mm channel shoulder 2.5 m long, Double clip (bridge clip), Single clip, M.S. Tube 40 mm dia, Solid blocks of size 30x20x20cm, Solid blocks of size 30x20x15cm, Red oxide Zinc chromate primer, Welding by electric plant, Fine sand (zone IV), Structural steel such as tees, angles, channels and R.S. joists, Galvanised wire mesh of average width of aperture 1.4 and nominal dia. of wire 0.63 mm, Wire nails, GI trafford profile sheet 0.35mm thick, Bitumen washer, G.I Limpet washer, Galvanised steel J or L hooks 8 mm dia, Galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, G.I. pipes 50 mm dia, G.I. pipes 40 mm dia, White Vitreous china 10 lit. (full flush) capacity controlled low level flushing cistern with all fittings, PVC pipe 25 mm outer dia. 10kgf cm2, PVC pipe 63 mm outer dia . 6kgf/cm2, Aracanut post, Mild steel tubes hot finished welded type, Polyethylene water storage tank with cover and suitable locking arrangemnet, Interlocking C C paver block ( 80mm thick ?M30 ), PVC Elbow 63 mm dia, PVC bend 63 mm dia, PVC Tee 63*63*63 mm dia, PVC end cap 63 mm dia, PVC Socket/coupling 63 mm dia, PVC Reducer 75*63 mm dia, PVC pipe 63 mm outer dia 4 kgf/cm2.
|
|
Tender description :
|
Material supply for MGNREGS works for the Ward 1,2,3,4,5,6,7 #*. Material supply for MGNREGS works for the Ward 1,2,3,4,5,6,7
|
