Tender Detail

Buyer/Seller : Can be viewed by Subscribers |
DID : 83047801
Requirement : Tender Invited For Clearing jungle including uprooting of rank vegetation grass brush wood trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. , "Supplying chemical emulsion in sealed containers including delivery as specified., Chlorpyriphos or Lindane emulsifiable concentrate of 20 Percent", "Diluting and injecting chemical emulsion for POST CONSTRUCTIONAL anti termite treatment excluding the cost of chemical emulsion Along external wall where the apron is not provided using chemical emulsion at the rate 7.5 litres or sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall and rodding etc. complete isto , With Chlorpyriphos or Lindane E.C. 20 Percent with 1 Percent concentration", "Earth work in excavation by mechanical means Hydraulic excavator or manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m, All kinds of soil.", Filling available excavated earth excluding rock in trenches plinth sides of foundations etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering lead up to 50 m and lift upto 1.5 m, Supplying and filling in plinth with sand under floors including watering ramming consolidating and dressing complete., "Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth, level 1 isto 3 isto 6 1 Cement 3 coarse sand zone III 6 graded stone aggregate 20 mm nominal size , "Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering shuttering finishing and reinforcement All work up to plinth level isto , 1 isto 1.5 isto 3 1 cement 1.5 coarse sand zone III 3 graded stone, aggregate 20 mm nominal size , "Reinforced cement concrete work in walls any thickness including attached pilasters buttresses plinth roof and string courses fillets columns pillars piers abutments posts and struts etc. above plinth level up to floor five level excluding cost of centering shuttering finishing and reinforcement, 1 isto 1.5 isto 3 1 cement 1.5 coarse sand zone III 3 graded stone aggregate 20 mm nominal size , ", Brick work with common burnt clay F.P.S. non modular bricks of class designation 7.5 in foundation and plinth in Cement mortar 1 isto 6 1 cement 6 coarse sand , Brick work with common burnt clay F.P.S. non modular bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1 isto 6 1 cement 6 coarse sand , "Half brick masonry with common burnt clay F .P .S. non modular bricks of class designation 7.5 in superstructure above plinth level up to floor V level., Cement mortar 1 isto 4 1 cement 4 coarse sand ", "Centering and shuttering including strutting propping etc. and removal of form for , Foundations footings bases of columns etc. for mass concrete", "Centering and shuttering including strutting propping etc. and removal of form for , Suspended floors roofs landings lintals beams balconies and access platform", "Steel reinforcement for R.C.C. work including straightening cutting bending placing in position and binding all complete upto plinth level Thermo Mechanically Treated bars of grade Fe 500D or more, Make SAIL or TATA or JINDAL ", "15 mm cement plaster on the rough side of single or half brick wall of mix isto 1 isto 6 1 cement isto 6 fine sand , Rates for external plastic are for height upto 10m from, ground level in less otherwise stated, Cement Make Nuvoco Lafarge or UltraTech or ACC or as per direction of EIC ", "12 mm cement plaster of mix , 1 isto 6 1 cement isto 6 fine sand , Rates for external plastic are for height upto 10m from, ground level in less otherwise stated, Cement Make Nuvoco Lafarge or UltraTech or ACC or as per direction of EIC ", "6 mm cement plaster of mix , 1 isto 3 1 cement 3 fine sand , Rates for external plastic are for height upto 10m from, ground level in less otherwise stated, Cement Make Nuvoco Lafarge or UltraTech or ACC or as per direction of EIC ", Neat cement punning., "Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade, New work Two or more coats applied at the rate 1.43 ltr or 10 sqm , over and including priming coat of exterior primer applied, at the rate 2.20 kg or 10 sqm , Make Dulux or Burger or Asian Paints or as per direction of EIC", White washing with lime to give an even shade New work three or more coats mix with fevicol DDL and Robin Blue or as per direction of EIC, "Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture., Preferable make Dulux or Burger or Asian Paints or as per direction of EIC, Make Dulux or Burger or Asian Paints or as per direction of EIC", Making plinth protection 50mm thick of cement concrete 1 isto 3 isto 6 1 cement 3 coarse sand zone III 6 graded stone aggregate 20 mm nominal size over 75mm thick bed of dry brick ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including necessary excavation levelling and dressing and finishing the top smooth, "Providing and fixing angle iron frames for doors windows and ventilators of mild steel Angle sections of size 35x35x5 mm joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T iron frame or to the wall with dash fastener including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer all complete as per the direction of Engineer In charge., Make SAIL or TATA or JINDAL ", "Providing and fixing ISI marked flush door shutters conforming to IS isto 2202 Part I decorative type core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters., 30 mm thick including ISI marked Stainless Steel butt hinges, with necessary screws", "Structural steel work in single section fixed with or without connecting plate including cutting hoisting fixing in position and applying a priming coat of approved steel primer all complete., Make SAIL or TATA or JINDAL ", 25 mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762 mm into 25 mm or less as per requirement with an average wall thickness of 1 mm plus or minus 0.3 mm . PVC foam end cap of size 23x10 mm are provided on both vertical edges to ensure the overall thickness of 25 mm. M.S. tube having dimensions 19 mm into 19 mm and 1.0 mm plus or minus 0.1 mm is inserted along the hinge side of the door. Core of the door shutter should be filled with High Density Polyurethane foam. The Top and Bottom edges of the shutter are covered with an end cap of the size 25 mm into 11 mm. Door shutter shall be reinforced with special polymeric reinforcements as per manufacturer specification and direction of Engineer in charge to take up necessary hardware and fixtures. Stickers indicating the locations of hardware will be pasted at appropriate places, "Providing and fixing ISI marked oxidised M.S. Sliding door bolts with nuts and scrows etc. complete .as per the direction of directions of Engineer in charge.300x16 mm , ", "Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS 15622 thickness to be specified by the manufacturer of approved make Somany or Kajaria or Nitco in all colours shades except burgundy bottle green black of any size as approved by
Tender description : Title1,title2,title3,title4,ti...
Company Industry: Minerals

Key values

EMD : INR 39,856
Tender Estimated cost : INR 3,985,596
Closing date : 12/05/2025
Location : India-Jharkhand

Tender Documents

Top