|
Requirement :
|
Supply of machinery and machining tools - crank case heater, packing teflon, cover bearing assy, bearing cover, blind plug, bearing cover, crank shaft ac770/870, annual inspection kit part no. kx127-2, shaft seal replacement kit part no. kxgs127, oil filter, star bearing kit, star shaft rotor & backing, star bearing housing small, star bearing housing large, rear and bearing, capacity control slides 2.2 vr, shim set, set of v belts, cathodic bolt, gasket set for condenser, corrosion plugs, valve angle type 1/4"ntp(m) x 1/4" flare, valve hand shut off type 1/4" flare, three way valve 1/4", filter drier core, catch all filter drier filter drier c-032f, thermostatic expansion valve for liquid injection line, ss needle valve ¼" ods, vibration eliminator:ss301 1" id, double braided, screwed en, vibration eliminator :ss 304 hose 2" id, double braided,tota, mobil eal arctic 68, adjustable spanner 8"/12", compressor suction pressure switch, compressor discharge pressure switch, differential pressure switch danfoss rt260a 1.5 to 11 bar, temperature switch danfoss rt107 25 to 90 deg c, temperature switch danfoss rt7 -25 to 15 deg c, temperature sensor danfoss mbt 5210-000-0200-0231, solenoid valve plunger danfoss evm nc code 027b1120, solenoid valve body danfoss cvh6 code 027f1120, pilot operated solenoid valve sporlan 180s with24v dc coil, coil for pilot operated solenoid valve, compressor suction pressure gauge/lube oil, pressure gauge 65 dial -1 to 15 kg/cm2 for r134a, compressure suction pressure gauge, pressure gauge 65 dial 0 to 25 kg/cm2 for r134a, differential pre. gauge-switch hirlekar dpg 200 (0-1 kg/cm2), temperature gauge 100 dial 0 to 100 deg c, sw temp gauges, temperature gauge 100 dial -30 to 50 deg c, set of indication lamps (one of each type) for lcp, auxiliary contractor(2no+2nc), selector switch (one of each type included in one set), cylinder pin dowel pin, cover shaft seal, linear position indicator, semiconductor fuse.
|
