|
Requirement :
|
Providing estate electrical services in urban health centre at, Earth work in excavation in foundations, trenches, etc. in all kinds of soils, not exceeding 2 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil, clear from the edge of excavation and subsequent filling around masonry, in 15 cm layers with compaction, including disposal of all surplus soil, as directed with in a lead of 30 metres(HSR 6.6) (CP 425%) , Cement concrete 1 : 6 : 12 with brick ballast 40 mm Nominal size in foundation and plinth. (HSR 10.30+CP 450%), Cement concrete 1 : 1 ½ : 3 with stone aggregate 20 mm nominal size in foundation and plinth. (HSR 10.42+CP 450%), First class brick work laid in cement sand mortar 1:4 in foundation and plinth. (HSR 11.4 (C.P.@ 600 %), 12 mm thick cement plaster 1:4. (HSR 15.5 +CP 500%), Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade. (HSR 16.3+CP 230%) Ist quality , Applying priming coat with metal primer on New steel or iron work including preparation of surface. (HSR 16.9+CP 230%) Ist quality , Preparation of plastered or concrete surfaces for painting, including sand papering the surface, applying one coat of linseed oil, and filling with approved quality filler, consisting of white lead, linseed oil, varnish and chalk mitti including finishing surface to the required finish, complete.(HSR 16.24) (CP 230%) , Applying priming coat with cement primer in all shades on newly plastered or concrete exterior surfaces.( Ist quality) (HSR 16.25) (CP 230%) , Providing two coats of exterior acrylic emulsion paint. (HSR 16.79+CP 0%) (b) 1st quality., Wrought iron and mild steel (using angles, flats square bars, tees and channels) ladders, grills, gratting frames, window guards, iron doors openable or fixed stair case or parapet or any other type of railing, gates and tree guards etc., including cost of screws and welding rods or bolts and nuts complete fixed in position. (HSR 18.12+CP 500%), Providing and fixing hard drawn steel wire fabric 75 mm X 25 mm rectangular mesh with 3.25 mm dia wire fixed on steel windows of standard rolled sections with 3 mm thick flat iron cover moulding of 12.5 mm width fixed with machine screws welded complete in all respect. (HSR 18.33+CP 500%), Supplying, hoisting and placing in position tubular trusses including runners, purlins, consisting of steel tubes conforming to I.S. specifications of tested quality duly welded with fillet welds 6 mm thick through-out including wind bracing. Open end of pipe sealed with 3 mm thick plate including the cost of nuts and bolts where bolts connections are specified at flange joints including one coat of ready mixed red oxide zink cromate primer of approved quality assembling and fixed in positon complete in all respect.(HSR 18.14+CP500%), EARTHING. (HSR 31.22+CP 350%) iii)Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as equired., iv)Earthing with tinned copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) comlete as equired. , v)Extra for charcoal or coke and salt for G.I. Plate or copper plate earth electrode. , xiv) Pdg. and fixing 25 mm x 5 mm copper strip on surface or in recess for connections etc. as required with all labour and material. , xv) Pdg. and fixing 25 mm x 5 mm G.I. Strip on surface or in recess for connections etc. as required with all labour and material. , Supply and erection of PVC pipe of 6 kg. pressure laid 1 metre below ground level complete including digging refilling of the trench with jointing etc. HSR 31.21(xxx) ( C ) CP 350% PVC pipe 65 mm dia. , S/E of under ground cable loose in existing pipe or trenches including necessary connection, digging and refilling of trenches. (HSR 31.26+CP 140%) xxviii)70 Sq. mm 3.5 Core Cable (Armoured), S/E of heavy duty 4 pole ON load changeover load breaker switch comprising of switches 63 amp to 400 amp suitable for operation on 415 V 50 Hz AC supply complete with handle assembly having door interlock & padlocking arrangement on existing panel / including making necessary connections with petty material required to complete the job. (HSR 31.74+CP 0%) (vi) 200 amp 4 pole ON load changeover switch , S/E of MS bucket stand suitable for 6 nos. fire buckets ( without buckets) made out of angle from of size 40 mm x 40 mm x 6mm i/c the cost of welding, labour and two coats of approved paint including one coat of red oxide. (NS item), S/E of fire buckets of 9 liters capacity made out of 24 gauge GI sheet& duly painted with one coat of red oxide and two coat of approved paint in red colour written with fire as per fire protection complete with necessary sand filling in the bucket and labour etc. (NS item), S/E of fire existingusher ISI marked C02 type of 4.5 kg capacity as per IS:7285 duly erected/hangs on wall with hooks i/c the cost of hook, screws etc with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer in charge of the work. (NS item), S/E of fire existingushers ISI marked dry chemical powder type of 4 KG capacity as per IS duly erected/hangs on wall with hooks i/c the cost of hook, screws etc with all labour and material required to complete the job in all respect to the entire satisfaction of the Engineer- in - Charge of the work. (NS item), S/E of of hi - rib profilrd sheeting 1000 - 1020 mm cover width 28.30 mm creast 200 - 150 mm centre to centre manufactured from 0.50 mm TCT Hi - Tensile bars galvalum sheet (AZ - 150 gm aluminium zink alloy metallic coating sheet) complete with all labour and petty material required to complete the job i/c carriage, loading , unloading, westage, fixing on existing MS structure with STSC screws, nuts, bolts & washers etc.as required upto entire staisfactrion of Engineer - In - Charge of work. (NS item), S/I/T/C of high wall mount Split Air-conditioning unit of Hitachi, Mitsubishi, O-General, Daikin - Make of 3 star rating to be operated on 220Volts(+) (-) 10% single phase,50 Hz AC supply and consisting of condensing indoor unit, cordless remote,upto 6.00 RMT of hard copper referigerent piping with insulation and cabling between indoor and outdoor unit, copper wound voltage stablizer 5.00 KVA 100 up wall mount, first charge of R-22 Gas & oil and MS stand.The work should be completed in all respect i/c making repair of wall,floor and roof in origional shape caused by making holes and chases etc., 1.5 tr capacity, 2.0 tr Capacity, Supply, installation, testing and commissioning of refrigerant piping made of good quality copper tube with insulation & drain pipe of required dia for 1.5 TR/ 2 TR cap Split Air-conditioner recessed in wall complete with all labour and petty material required to complete the job., "A. S/I/T/Cof 62.5 KVA water cooled , silent diesel Generating set complete with alternator rated at Three phase 220 volts, 0.8 power factor, 50 cycle per second , 1500 RPM with AMF Panel (outside/inside the canopy), Acoustic Enclosure and battery charger etc.( To be installed out door on existing platform excluding cost of platform ) : -, ( A ) DIESEL ENGINE : Engine multi cylinder, developing output as per 62.5 KVA DG Set at 1
|
