|
Requirement :
|
Supply of consumable and non consumable items - schanz screw 2.5/3.0 mm, schanz screw 3.5/4.5 mm (thread sizes 12/18 mm), schanz screw 5.0/5.5 mm (cortical and cancellous) (thread size 12/18/32 mm), denham’s pin 4.5/ 5.0 mm, steinman pin 3.0/3.5 mm, steinman pin 4.5/5.0 mm, universal external fixator clamp, tube to tube clamps, tubular rods –4’’, 6’’, 8”, tubular rods –10, 12, 14”, forearm fixator clamps for 2.5mm pins, forearm fixator clamps for 3.5mm pins, forearm fixator connecting rods – all sizes, forearm fixator radio lucent carbon connecting roads all sizes, spanners (size 6/7, 8/9 ,10/11), box spanner (8/9/10/11), ring fixator set: one set consists of eight half rings stainless steel (120 to 220 mm), eight 1.8 mm k wires (bayonet and trocar tip), 12 threaded rods (4 to 10”), 16 slotted nuts (centric/ eccentric/ schanz screw holding), 8 ring connecting bolts, 4 washers, 80 nuts, 2 spanners size 10., ring fixator set: one set consists of eight carbon fiber half rings (120 to 220 mm), eight 1.8 mm k wires (bayonet and trocar tip), 12 threaded rods (4 to 10”), 16 slotted nuts (centric/ eccentric/ schanz screw holding), 8 ring connecting bolts, 20 washers, 80 nuts, 2 spanners size 10, k wires 1.8mm for illizarov, threaded rods – 4”, 6”, threaded rods –8”, 10”, threaded rods –12”, twisted plate (misc sizes), straight plate (misc sizes), male posts (1 to 5 hole), female posts (1 to 5 hole), hexagonal socket (misc length), telescopic rods, concavo- convex washers, hinges for illizarov ring, complete set of jess assembly (medium/ large) for ctev (comprises of 30 link joints , 4 l rods , 2 z rods , 4 distractors, 2 large connecting rods, 6 straight connecting rods and 2 allens key etc.), distractor- small, with 4 shanz screws, 1.5/ 2.5 mm, with one allen key. unilateral distracter with clamps for two pins proximal and two distal, suitable for application on fingers, distractor- medium, with 4 shanz screws, 2.5/ 3.5 mm, with one allen key. unilateral distracter with clamps for two pins proximal and two distal, suitable for application on wrist, distractor- large, with 4 shanz screws, 3.5 mm, with one allen key. unilateral distracter with clamps for two pins proximal and two distal, suitable for application on forearm and ankle, radio lucent forearm distractors with 4 shanz screws, 3.5 mm, with one allen key. unilateral distracter with clamps for two pins proximal and two distal, suitable for application on forearm, monoaxial external fixation device set with provision of bone transport. one set comprising of one mono rail, three clamps (central clamp/ end clamp/ swivel clamp), two compression distraction unit (misc sizes), allen key, six tapered schanz screws, 6.0 to 6.5 mm diameter (limb reconstruction system)*, monoaxial external fixation device set with provision of bone transport. one set comprising of one mono rail, three clamps (central clamp/ end clamp/ swivel clamp), two compression distraction unit (misc sizes), allen key, six tapered schanz screws, 6.0 to 6.5 mm diameter (limb reconstruction system)* (for upper limb), k nail sizes 8-14mm, length 32-44cm, radius intramedullary nails 2-4mm diameter, 22-32 cm length, ulna intramedullary nails 2-4mm diameter, 22-32 cm length, 3.5mm reconstruction plates (locking and non-locking) 5-12 holes with nine 3.5mm screws (stainless steel), 3.5mm reconstruction plates (locking and non-locking) 5-12 holes with nine 3.5mm screws (titanium), 3.5mm low contact dcp 6-12 holes with nine 3.5 mm cortical screws (12 to 24 mm) (stainless steel), 3.5mm low contact dcp 6-12 holes with nine 3.5 mm cortical screws (12 to 24 mm) (titanium), 1/3 tubular plates 6-8 holes with eight 3.5.mm cortical screws (12 to 24 mm) (stainless steel), 1/3 tubular plates 6-8 holes with eight 3.5.mm cortical screws (12 to 24 mm) (titanium), 4.5 mm narrow dcp, low contact, 7-12 holes with nine 4.5mm screws (14-28mm length) (stainless steel), 4.5 mm narrow dcp, low contact, 7-12 holes with nine 4.5mm screws (14-28mm length) (titanium), 4.5mm narrow low contact locking compression plate 6-12 holes with eight locking screws and four non locking screws (stainless steel) (14-28mm length) (stainless steel), narrow low contact locking compression plate 6-12 holes with eight locking screws and four non locking screws (stainless steel) (14-28mm length) (titanium), 4.5 mm broad low contact locking compression plate, 6-18 holes with nine 4.5mm screws (14-28mm length) (stainless steel), 4.5 mm broad low contact locking compression plate, 6-18 holes with nine 4.5mm screws (14-28mm length) (titanium), 2.7 mm sfs dcp, 5 to 8 holes with eight 2.7 mm screws (length 10 – 20 mm ) (stainless steel), 2.7 mm sfs dcp, 5 to 8 holes with eight 2.7 mm screws (length 10 – 20 mm ) (titanium), pelvis reconstruction plates, prebent all sizes (instrumentation to be provided free of charges during the surgeries), with ten screws, ss*, pelvis reconstruction plates, prebent all sizes (instrumentation to be provided free of charges during the surgeries), with ten screws, titanium*, 4.0mm cannulated cancellous screw, partially threaded with guide wire and washer ,(length30-60mm), various thread lengths (stainless steel), 4.0mm cannulated cancellous screw, partially threaded with guide wire and washer ,(length30-60mm), various thread lengths (titanium), 6.5mm partially threaded cancellous screw with washer (length 35-110mm, thread lengths 12mm/ 16mm/ 32mm) (stainless steel), 6.5mm partially threaded cancellous screw with washer (length 35-110mm, thread lengths 12mm/ 16mm/ 32mm) (titanium), 7.0mm cannulated cancellous screw, partially threaded with guided wire and washer (length 65 to 110mm, thread lengths 12mm/16mm/32mm)* (stainless steel), 7.0mm cannulated cancellous screw, partially threaded with guided wire and washer (length 65 to 110mm, thread lengths 12mm/16mm/32mm)* (titanium), washer for screws sizes 4 mm ,4.5 mm, 6.5 mm ,7 mm (stainless steel), washer for screws sizes 4 mm ,4.5 mm, 6.5 mm ,7 mm (titanium), mini fragment plates (1.5/ 2.0/ 2.4 mm) *, locking (all sizes, different shapes) and corresponding screws (screw heads star head and low profile). one set comprises of one plate and 6 screws. titanium make., proximal tibial lateral anatomical locking plate 5 to 11 holes with nine 4.5 mm locking screws and two 4.5mm cortical screws. (stainless steel ), proximal tibial lateral anatomical locking plate 5 to 11 holes with nine 3.5 mm locking screws and four 3.5 mm cortical screws; should have atleast 4 screws in periarticular region. ( titanium ), proximal tibial medial anatomical locking plate 5 to 11 holes with nine 3.5mm locking screws and six 3.5 mm cortical screws, atleast 3 screws in periarticular region (titanium), distal tibial medial anatomical locking plate 5 to 11 holes with 9 locking screws and six cortical screws (stainless steel), distal tibial medial anatomical locking plate 5 to 11 holes with 9 locking screws and six cortical screws (titanium), distal tibial metaphyseal plate 5 to 11 holes with 9 locking screws and 4 cortical screws (stainless steel)*, distal tibial metaphyseal plate 5 to 11 holes with 9 locking screws and 4 cortical screws (titanium)*, distal tibial anterolateral anatomical locking plate 5 to 11 holes with 9 locking screws and four cortical screws, atleast 4 screw in periarticular region (stainless steel) , distal tibial anterolateral anatomical locking plate 5 to 11 holes with 9 locking screws and four cortic
|
