|
Requirement :
|
supply of veterinary instrument, equipment and apparatus, and other items - supplies/consumables with maintenance for grooming kit 30 blades, shampoo for tick bath 50 ltsperliter /towels25 12 inch x24 inch/ nail finder tips half inch 50 pcs
service/repair/maintenance kit with 4t solution spray 5 bottels/elen key set in mm and inch set of 15/screw driver set of 6 plus and minus ttpe 4 inch to 18 inch length adjustable screw wrench set/ spanner set, drill with capacity of 12 mm with tungsten bits set of 16 drill from 1 mm to 12 mm hss. all spares, screw drivers and keys to be provided in 100 each as per requirements. player insulated, nose player insulated, dryer hot and air blower arrangement, incubator for small animals:, laryngoscope set (miller), microchip and reader with software for registry of micochipped animals: with microchip reader two, microchip(pack of 100), five parameter monitor with printer, sling arrangement for bovine and equine use for downed cows, birth paralysis, milk fever, and strained muscles, coaxial ophthalmoscope and macro view otoscope set, oxygen support with mask set, ambu- bag mox regulator and o2 cylinder, eldridge anaesthesia mask, set of three with tubing suitable, anaesthesia masks, refracto-meter for urine-veterinary specific suitable for canine and feline, veterinary wireless digital video otoscope: with a high magnification lens & multiple innovative device streams high quality ultra-bright leds, kennels/cages for day care: constructed from the highest grades of 304 stainless steel material including the square tube frame, cage shell-one, trim hardware, screws and platforms, modular table for examination: all german stainless steel grade 304 matt finish, modular side counters with stainless steel top. skating, urine analyzer: with 10 essay parameters with micro albumin, consumables for urine analyser 1000, operation theatre led light single pettel wall, veterinary specific x-ray unit with positioner, orthopaedic tools bone cutter drill and consumables set containing: bone screw forceps(9.2cm long)-one unit, bone screw driver 3.5mm with hex head (27cm long)-one unit, bone reduction forceps with sharp tip (22cm long)-one unit, bone reduction forceps (19cm long)-one unit, bone holding forceps (23cm long)-one unit, bone tap ha 4.5-1-one unit, bone tap hb 6.5-one unit, bone screw extractor with t handle-one unit, bone reamer with t handle-one unit, hollow mill for removal of screws bone screw-one unit, depth gauge 90mm-one unit, double drill sleeve 3.5-4.5-one unit, double drill sleeve 4.5-6.5 mm-one unit, drill guider 3.2 mm-two unit, hofmann retractors 42mm-two unit, bending irons (27cm long)-two unit, bone elevator 12mm blades-one unit, bone elevator 15mm blades-one unit, drill bit 3.2 mm-2 pcs, drill bit 4.5 mm-2 pcs, drill bit:1.1-2 pcs, drill bit: 1.5-2 pcs, drill bit 2.0-2 pcs, drill bit 2.5, drill bit 3.2-2 pcs, neutral & loaded drill guide, 1mm-one unit, 1.5 mm-one unit, 2 mm-one unit, 2.5 mm-one unit, 3.2 mm-one unit, ha 3.2 tap sleeve & 2.5 drill guide-one unit, ha 4.0 tap sleeve & 3.5 drill guide-one unit, tap sleeve 2.7mm- one unit, tap sleeve 2.0mm-one unit, ha1.5 tap-one unit, ha2.0 tap-one unit, ha2.7 tap-one unit, ha3.5 tap- one unit, ha 4.0 tap- one unit, depth gauge-one unit, hex head screw driver 2.5mm-one unit, hex head screw driver 1.5mm-one unit, plate benders pair-modern design large-one unit, plate benders small-one unit, periosteal elevator( round head)-one unit, broken screw exterioriser-one unit, counter sink large-one unit, counter sink small-one unit, periosteal elevator (flat head)-one unit, reduction forceps with point-one unit, reduction forceps-one unit, self-cantering forceps case-one unit, screw rack-3.5/4.0mm-one unit, screw rack-1.5/2.0/2.7- one unit, bone plate 1.5mm-five unit, bone plate 2.0mm-five unit, bone plate 2.7mm-five unit, bone plate 3.5mm-five unit, bone plate 4.0mm-five unit, cortical screws self-tapping, 1.5mm-ten unit, 2.0mm-ten unit, 2.7mm-ten unit, 3.5mm-ten unit, 4.0mm-cancellous-ten unit, small dcp plates 3.5mm = 6 hole-two unit, small dcp plates 3.5mm = 7 hole-two unit, small dcp plates 3.5mm = 8 hole-two unit, small dcp plates 3.5mm = 9 hole-two unit, small dcp plates 3.5mm = 10 hole-two unit, small dcp plates 3.5mm = 11 hole-two unit, small dcp plates 3.5mm = 12 hole-two unit. orthopaedic instruments germany stainless drill length 100 mm tungsten coated hss 1.5mm-one unit, 2.0mm-one unit, 2.5mm-one unit, 2.7mm-one unit, 3.2mm-one unit, 3.5mm-one unit, 4.5mm-one unit steel all screws are self-drilling and self-tapping, featuring individually hand-sharpened cutting tips, cordless orthopaedic drill with 12-volt lithium ion multi-function cutting, scraping, sawing compatible with the broad range, battery operated x-ray unit with hoof positioner and plate protector: compact, fixed type examination table: stainless steel, table electric operated with actuator and remote controlled: stainless steel grade.
|
