|
Requirement :
|
Supply errection and commissioning of machineries and equipments - de-husker, fitted with 7.5 hp 40 rpm output geared motor, capacity : approx. 1500 coconuts per hour, de-sheller, fitted with 1.5 hp 3 phase 24 rpm geared motor, capacity approx. 300 shells per hour, 250 ltr. jacketed vessel, oas 776 dia x 610 + 600 mm ht. capacity 250 ltrs., inner shell & bottom dish made out of 5 mm thick ss304 , jacket shell and dish end made out of 3 mm thick ss304, lid in 1.2 mm ss 304. vessel supplied with fittings, legs made out of 3” dia nb sch.10 ss304 pipe with baseplate", 200 ltr cold water washing tank ss304, 250 ltr hot water blanching tank, oas 760x550x610+300 mm ht capacity 250 ltr., tank made of 2 mm thick ss 304, heat exchanger pipes made of 1-1/2” nb and 1” nb ss 304 pipes. basket made of 1.6mm thick ss 304 perforated sheet, legs made of 2” dia ss 304 pipes. tank supplied with necessary fittings and two baskets, disintegrator, oas: 1250 x 750 x 900 mm h. capacity 500 kg nuts/hr. fitted with 7.5 hp 2880 rpm 3 phase motor belt driven, frame made of 3” x 1-1/2” ms channel, casing in ss304 mounted on 25 mm thk ms plate, double screw press , capacity 600 nuts/hr, fitted with 5 hp geared motor output 36 rpm frame made of ms channel, all contact parts in ss 304, 150 ltr capacity stirrer vessel, oas: 575 dia x 650+600mm ht. 150 ltr capacity, inner shell and bottom dishend made of 5 mm thick ss316, outer shell and bottom dishend made of 3 mm thick ss304, lid made of 1 mm thick ss 316, legs made of 3” dia ss pipe, vessel fitted with helical geared motor 24 rpm output 1 hp 1440 rpm 3 phase motor, with necessary fittings., pouch sealing machine, continuous sealer with conveyor for retort pouch sealing, 600 ltr autoclave, oas: 777 dia x 1500 + 385 l x 777 + 720 mm ht – 600 ltr capacity, autoclave complete with steam inlet, cold water inlet, water outlet, condensate outlet, pressure gauge, digital temperature indicator, pressure relief valve. autoclave mounted on 6 mm thick ms brackets. shell, dish and lid made of 3 mm thick ss 304, trays made of 1”sq 3mm thick ss 304 weld mesh, chilled water plant, air cooled process chiller with danfos or emerson or equivalent compressor, siemens controls, air cooled inner grooved copper condenser, powder coated sheet metal cr., chilling capacity 10mt, 17.5 hp feed pump and circulating pump, thermax boiler or equiv., thearmax or equivalent non-ibr boiler diesel fired 600 kg capacity working pressure 10.54 kg/cm2 complete with chimney and diesel tank (water softner plant optional), 250 ltr capacity vessel, oas: 760 x 550 x 610 + 300 mm ht. capacity 250 ltr. tank made of 2mm thick ss 304, legs made of 2”dia ss 304 pipes. with drain valve, milk collecting vessels 50 ltr, oas: 398 dia x 450 + 300 mm ht. capacity 50 ltrs., vessel and bottom made of 1.6 mm thick ss 304, lid made of 1.2 mm thick ss 304 legs made of 2”dia ss 304 pipe, fermentation tank (for virgin coco.oil – by fermentation method) (100 ltr tank capacity) 10 to 12 ltrs vco/24 to 36 hrs. per tank), oas: 380 dia x 950 + 300 mm ht 100 ltr capacity vessel made of 1.6 mm thick ss 316 lid made of 1.2 mm thick ss316 fitted with drain valve and viewing glass, desiccated coconut dryer 100 kg/ hour , tilting lower type dc dryer, steam heated radiator, for average output of 100kg/hr, total power required 10 hp, steam required 14000 kcal/hr at 7kg cm, inkjet printer with conveyor for integrated coconut processing unit.
|
